Taylor Body Fat Scale 5741 Manual
Click Here ->>> https://bltlly.com/2sY7fV
Body Fat Analyzer and Scale 5757 Leading the Way in Accuracy® Thank you for purchasing a Taylor® Precision Product. Your Taylor® Body Fat Analyzer and Scale is an example of superior design and craftsmanship. Please read this instruction manual carefully before use. Keep these instructions handy for future reference. INTRODUCTION How Taylor's Body Fat Analyzer and Scale Works: This instrument uses BIA (Bioelectrical Impedance Analysis). BIA is one of the most accurate methods of measuring body fat.
TO TURN OFF THE SCALE: To turn the scale off, press the ON button. Or, the scale will turn off after about 20 seconds if no keys are pressed or nothing is weighed. NOTE: If you are having a problem operating this Analyzer please call 866843-3905 from 7:30 am to 4:30 pm, Mountain Standard Time, Monday through Friday. QUESTIONS AND ANSWERS How exactly is my body fat and water being measured? The Taylor Body Analyzer Scale uses a measurement method known as Bioelectrical Impedance Analysis (BIA).
If you're looking for a new scale to weigh yourself at home, you might consider one from Taylor Precision Products. The company makes a variety of scales, including models that analyze your body fat percentage.
But since any at-home scales comes with a slight margin of error, it's crucial you only use a body composition scale for a general estimate. And if you're searching for what's a happy weight range for your body, make an appointment with your physician.
When you stand on the scale, two electrodes positioned under each foot transmit a harmless, low-level electrical current through your body. The signal passes through lean mass quickly, while fat slows the current down, allowing it to estimate how much of your body is fat and what portion is lean mass.
Taylor body fat scales typically come with batteries. To get started using yours, flip it over and remove the plastic slip sticking out of the compartment (the slip is in place to prevent the batteries from draining while at the warehouse and during shipment). If there isn't a plastic slip, your model may not have batteries included, which means you'll have to purchase them separately.
And it's a good idea to learn the best time to weigh yourself too. Per the Taylor user manual, the most consistent way to read the scale is at the same time of day and under the same conditions, say, in the morning, naked. The scale also works as a regular scale that measures only weight. For this, just turn the scale on and stand on it, waiting a few seconds for your weight to appear.
Other errors will pop up if your feet aren't damp enough for the body fat reading, your feet aren't big enough to reach the sensors or the body fat or water percentage numbers are out of range for the scale.
Hinckley notes that body composition scales are designed to provide only a rough estimate of your body fat percentage, adding that "in studies, these smart scales were reasonably accurate for weight but not that precise for body composition."
"If you're going to get on a scale it can be helpful to see if your body composition is changing," Hinckley says. It can be discouraging to see the number go up or plateau, even if you're losing body fat and gaining muscle, she adds. With a body fat scale, these body composition changes are more apparent.
Sometimes, the best way to avoid errors is to ensure proper use of the device. It pays to read the user manual before stepping on the scale immediately. If one wants the scale to last long, then it is highly recommended to read and understand what the user manual says and consult it frequently if you are unsure about its use. 2b1af7f3a8